Introducing a 3D-printed DIY powered 2-axle chassis
A 3D-printed powered chassis for 2-axle locomotives.
Posts by Tag
- mechanics 40
- 3d-printing 28
- electronics 24
- 1/87 scale 19
- ho-scale 18
- remote-control 13
- railroad 12
- crane 10
- motorized 9
- pcb 9
- ble 9
- arduino 8
- wagon 8
- scenery 7
- portal crane 6
- animated 5
- equipment 5
- cargo 5
- mcu 4
- winch 3
- stm32 3
- rocket 2
- slip ring 2
- actuators 2
- metal 2
- useful parts 2
- buildings 2
- audio 1
- esp8266 1
- 3d printing 1
- special purpose 1
- esp32 1
mechanics
Introducing project: a tank container collection
This week I’ve reworked my older tank container into a collection of different options, so they add some variety to the layout. For now, there are 2 ...
Another tank container
This week I’ve added one more tank into my tank container collection, codename frame2. It turned out to be much more complicated that previous design...
Another tank container assembled
I’ve assembled, primed, sanded and painted second container variant (frame2). Here are the pictures (along with frame1 variant). New variant is in red.
Project: Flatcar series 13-401
A new project: Flatcar series 13-401. A model of a flat wagon, which is widespread in USSR, Russia and other 1520mm guage countries.
Photos of printed flatcars
Flatcar series 13-401 project now has photos of finished objects!
Project: bogie 18-100
HO scale train bogie for FDM and resin printers.
One weekend build: a gondola wagon
This weekend I’ve done a short project, which was printing a gondola (model 12-1592) car in HO scale.
A gondola wagon, now with cargo
Making cargo for a gondola ended up being longer than printing the gondola itself. I had some sticks and branches lying around, that I cut to length and g...
Working on Soyuz rocket transporter
I have finally started to work on assembling 11T750 wagon for Soyuz rocket train.
Latest projects: K-701 heavy tractor and Yaroslavets river boat
So, finally an update on what I am currently doing.
Introducing Project 376 Yaroslavets riverboat
A new project is released on this website and on Printables (thingiverse and cults will follow soon).
Updates for February and March
So, here is what I’ve been doing for the past 2 months.
Slip ring ideas, two of them
The functional crane model I’m working on requires a slip ring to rotate superstructure. Currently this is implemented as a 3D-printed casing for bron...
Winch based on N20 gearmotor
Any functional crane model obviously requires a winch (or two).
Experiments with cast solder
In portal crane project the hook has to be as heavy as possible, otherwise the threads will not be tightened enough and will skip all the time (and will l...
Casting solder into resin-printed molds
Last time I tried to pur solder into a hand-cut cardboard "mold". The result was as inaccurate as one would expect. My attempts to smooth it out with epoxy...
Crane updates
The crane mechanics is close to completion
Useful parts: pogo pins
I’ve recently encountered spring-loaded pogo pins for PCB testing.
Updates on the projects
There were no updates for a long time due to my vacation, but finally here are some.
Updates on RC truck and BLE-RC electronics
A latest video of state of the project (mid-august):
RC truck taking shape
Bodywork
Updates on RC kit and BLE-RC firmware
BLE-RC firmware
Useful parts: TWS headphones
Another issue of "Useful parts", this time about TWS headphones.
Finally RC kit project has a video!
I finally made a video about RC kit project:
Moving on to RC transmitter
I’ve created a page for the development of the transmitter. Expect updates there. So far I’ve created a breadboard prototype that is able to c...
3D-printed powered 2-axle chassis
A chassis project for a DIY locomotive, e.g. shunter, railbus, tram etc
Tank containers collection
Collection of HO scale models of tank containers
Containers collection
Collection of HO scale models of ISO containers
Flatcar series 13-401
A model of a flatcar widespread in USSR, Russia and other 1520mm guage countries
Freight bogie series 18-100
HO scale train bogie for FDM and resin printers.
Soyuz transporter train
A model of a Soyuz rocket transporter train in HO scale.
Motorized wind generator
3D-printable scale model of a wind generator
Motorized oil pumpjack
A model of an oil pumpjack for industrial layouts.
Project 376 “Yaroslavets” riverboat
HO scale model of a Yaroslavets riverboat.
Level-luffing crane, motorized and 3D printed [WIP]
3D printed and motorized model of a horse-head portal crane in HO scale
Container crane, motorized [Idea]
Motorized container terminal crane in HO scale. This is currently only an idea.
3D-printed RC kit for 1/87 vehicles
3D-printed RC conversion kit instead of usual metal parts
3d-printing
Introducing a 3D-printed DIY powered 2-axle chassis
A 3D-printed powered chassis for 2-axle locomotives.
Introducing project: a tank container collection
This week I’ve reworked my older tank container into a collection of different options, so they add some variety to the layout. For now, there are 2 ...
Another tank container
This week I’ve added one more tank into my tank container collection, codename frame2. It turned out to be much more complicated that previous design...
Another tank container assembled
I’ve assembled, primed, sanded and painted second container variant (frame2). Here are the pictures (along with frame1 variant). New variant is in red.
Project: Flatcar series 13-401
A new project: Flatcar series 13-401. A model of a flat wagon, which is widespread in USSR, Russia and other 1520mm guage countries.
Photos of printed flatcars
Flatcar series 13-401 project now has photos of finished objects!
Project: bogie 18-100
HO scale train bogie for FDM and resin printers.
One weekend build: a gondola wagon
This weekend I’ve done a short project, which was printing a gondola (model 12-1592) car in HO scale.
A gondola wagon, now with cargo
Making cargo for a gondola ended up being longer than printing the gondola itself. I had some sticks and branches lying around, that I cut to length and g...
Working on Soyuz rocket transporter
I have finally started to work on assembling 11T750 wagon for Soyuz rocket train.
Latest projects: K-701 heavy tractor and Yaroslavets river boat
So, finally an update on what I am currently doing.
Introducing Project 376 Yaroslavets riverboat
A new project is released on this website and on Printables (thingiverse and cults will follow soon).
Updates for February and March
So, here is what I’ve been doing for the past 2 months.
Slip ring ideas, two of them
The functional crane model I’m working on requires a slip ring to rotate superstructure. Currently this is implemented as a 3D-printed casing for bron...
Winch based on N20 gearmotor
Any functional crane model obviously requires a winch (or two).
Crane updates
The crane mechanics is close to completion
3D-printed powered 2-axle chassis
A chassis project for a DIY locomotive, e.g. shunter, railbus, tram etc
Tank containers collection
Collection of HO scale models of tank containers
Containers collection
Collection of HO scale models of ISO containers
Flatcar series 13-401
A model of a flatcar widespread in USSR, Russia and other 1520mm guage countries
Freight bogie series 18-100
HO scale train bogie for FDM and resin printers.
Soyuz transporter train
A model of a Soyuz rocket transporter train in HO scale.
Motorized wind generator
3D-printable scale model of a wind generator
Motorized oil pumpjack
A model of an oil pumpjack for industrial layouts.
Project 376 “Yaroslavets” riverboat
HO scale model of a Yaroslavets riverboat.
Level-luffing crane, motorized and 3D printed [WIP]
3D printed and motorized model of a horse-head portal crane in HO scale
Container crane, motorized [Idea]
Motorized container terminal crane in HO scale. This is currently only an idea.
3D-printed RC kit for 1/87 vehicles
3D-printed RC conversion kit instead of usual metal parts
electronics
On advanced audio effects on a layout
Making realistic continuous and polyphonic sound effects
Introducing a 3D-printed DIY powered 2-axle chassis
A 3D-printed powered chassis for 2-axle locomotives.
Motor board for portal crane
For some time I’ve wanted to develop a PCB again. Last time I did that was around 2021, when I made LocoNet-equipped decoder and command station for...
Motor board delivery updates
So, the JLCPCB and LCSC orders were made on April 28.
Crane updates
The crane mechanics is close to completion
Useful parts: pogo pins
I’ve recently encountered spring-loaded pogo pins for PCB testing.
Updates on the projects
There were no updates for a long time due to my vacation, but finally here are some.
Updates on RC truck and BLE-RC electronics
A latest video of state of the project (mid-august):
RC truck taking shape
Bodywork
Updates on RC kit and BLE-RC firmware
BLE-RC firmware
Useful parts: TWS headphones
Another issue of "Useful parts", this time about TWS headphones.
Finally RC kit project has a video!
I finally made a video about RC kit project:
Moving on to RC transmitter
I’ve created a page for the development of the transmitter. Expect updates there. So far I’ve created a breadboard prototype that is able to c...
MK0 of BLE-RC transmitter
Continuing on BLE-RC transmitter.
Level-luffing crane, motorized and 3D printed [WIP]
3D printed and motorized model of a horse-head portal crane in HO scale
Motor control board
A small PCB to control motors in small-scale models. I’ve developed it as part of the portal crane.
BLE-based micro scale RC receiver
A 10x14mm PCB with nRF52 MCU
Research on hardware selection
For the project, BLE hardware needs to be chosen. I’ve considered 2 options: using a ready-made BLE board and custom-made PCB.
Container crane, motorized [Idea]
Motorized container terminal crane in HO scale. This is currently only an idea.
Arduino Nano Expansion Board
With options for motor, OLED display and Nunchuck
3D-printed RC kit for 1/87 vehicles
3D-printed RC conversion kit instead of usual metal parts
RC transmitter using BLE [WIP]
An ESP32 RC remote with display that works over BLE
1/87 scale
Introducing project: a tank container collection
This week I’ve reworked my older tank container into a collection of different options, so they add some variety to the layout. For now, there are 2 ...
Latest projects: K-701 heavy tractor and Yaroslavets river boat
So, finally an update on what I am currently doing.
Introducing Project 376 Yaroslavets riverboat
A new project is released on this website and on Printables (thingiverse and cults will follow soon).
Updates for February and March
So, here is what I’ve been doing for the past 2 months.
Winch based on N20 gearmotor
Any functional crane model obviously requires a winch (or two).
Crane updates
The crane mechanics is close to completion
Updates on the projects
There were no updates for a long time due to my vacation, but finally here are some.
Updates on RC truck and BLE-RC electronics
A latest video of state of the project (mid-august):
RC truck taking shape
Bodywork
Updates on RC kit and BLE-RC firmware
BLE-RC firmware
Finally RC kit project has a video!
I finally made a video about RC kit project:
Updates
The 3D printable files for RC truck are published!. The link is on project page, and for convenience also here:
Motorized wind generator
3D-printable scale model of a wind generator
Motorized oil pumpjack
A model of an oil pumpjack for industrial layouts.
Project 376 “Yaroslavets” riverboat
HO scale model of a Yaroslavets riverboat.
Level-luffing crane, motorized and 3D printed [WIP]
3D printed and motorized model of a horse-head portal crane in HO scale
3D-printed RC kit for 1/87 vehicles
3D-printed RC conversion kit instead of usual metal parts
ho-scale
Introducing a 3D-printed DIY powered 2-axle chassis
A 3D-printed powered chassis for 2-axle locomotives.
Introducing project: a tank container collection
This week I’ve reworked my older tank container into a collection of different options, so they add some variety to the layout. For now, there are 2 ...
Another tank container
This week I’ve added one more tank into my tank container collection, codename frame2. It turned out to be much more complicated that previous design...
Another tank container assembled
I’ve assembled, primed, sanded and painted second container variant (frame2). Here are the pictures (along with frame1 variant). New variant is in red.
Project: Flatcar series 13-401
A new project: Flatcar series 13-401. A model of a flat wagon, which is widespread in USSR, Russia and other 1520mm guage countries.
Photos of printed flatcars
Flatcar series 13-401 project now has photos of finished objects!
Project: bogie 18-100
HO scale train bogie for FDM and resin printers.
One weekend build: a gondola wagon
This weekend I’ve done a short project, which was printing a gondola (model 12-1592) car in HO scale.
A gondola wagon, now with cargo
Making cargo for a gondola ended up being longer than printing the gondola itself. I had some sticks and branches lying around, that I cut to length and g...
Working on Soyuz rocket transporter
I have finally started to work on assembling 11T750 wagon for Soyuz rocket train.
3D-printed powered 2-axle chassis
A chassis project for a DIY locomotive, e.g. shunter, railbus, tram etc
Tank containers collection
Collection of HO scale models of tank containers
Containers collection
Collection of HO scale models of ISO containers
Flatcar series 13-401
A model of a flatcar widespread in USSR, Russia and other 1520mm guage countries
Freight bogie series 18-100
HO scale train bogie for FDM and resin printers.
Soyuz transporter train
A model of a Soyuz rocket transporter train in HO scale.
Level-luffing crane, motorized and 3D printed [WIP]
3D printed and motorized model of a horse-head portal crane in HO scale
Container crane, motorized [Idea]
Motorized container terminal crane in HO scale. This is currently only an idea.
remote-control
Updates on the projects
There were no updates for a long time due to my vacation, but finally here are some.
Updates on RC truck and BLE-RC electronics
A latest video of state of the project (mid-august):
RC truck taking shape
Bodywork
Updates on RC kit and BLE-RC firmware
BLE-RC firmware
Finally RC kit project has a video!
I finally made a video about RC kit project:
Moving on to RC transmitter
I’ve created a page for the development of the transmitter. Expect updates there. So far I’ve created a breadboard prototype that is able to c...
MK0 of BLE-RC transmitter
Continuing on BLE-RC transmitter.
Updates
The 3D printable files for RC truck are published!. The link is on project page, and for convenience also here:
BLE-based micro scale RC receiver
A 10x14mm PCB with nRF52 MCU
Research on hardware selection
For the project, BLE hardware needs to be chosen. I’ve considered 2 options: using a ready-made BLE board and custom-made PCB.
RC transmitter using BLE [WIP]
An ESP32 RC remote with display that works over BLE
railroad
Introducing a 3D-printed DIY powered 2-axle chassis
A 3D-printed powered chassis for 2-axle locomotives.
Project: Flatcar series 13-401
A new project: Flatcar series 13-401. A model of a flat wagon, which is widespread in USSR, Russia and other 1520mm guage countries.
Photos of printed flatcars
Flatcar series 13-401 project now has photos of finished objects!
Project: bogie 18-100
HO scale train bogie for FDM and resin printers.
One weekend build: a gondola wagon
This weekend I’ve done a short project, which was printing a gondola (model 12-1592) car in HO scale.
A gondola wagon, now with cargo
Making cargo for a gondola ended up being longer than printing the gondola itself. I had some sticks and branches lying around, that I cut to length and g...
Working on Soyuz rocket transporter
I have finally started to work on assembling 11T750 wagon for Soyuz rocket train.
3D-printed powered 2-axle chassis
A chassis project for a DIY locomotive, e.g. shunter, railbus, tram etc
Flatcar series 13-401
A model of a flatcar widespread in USSR, Russia and other 1520mm guage countries
Freight bogie series 18-100
HO scale train bogie for FDM and resin printers.
Soyuz transporter train
A model of a Soyuz rocket transporter train in HO scale.
Motorized oil pumpjack
A model of an oil pumpjack for industrial layouts.
crane
Updates for February and March
So, here is what I’ve been doing for the past 2 months.
Slip ring ideas, two of them
The functional crane model I’m working on requires a slip ring to rotate superstructure. Currently this is implemented as a 3D-printed casing for bron...
Winch based on N20 gearmotor
Any functional crane model obviously requires a winch (or two).
Experiments with cast solder
In portal crane project the hook has to be as heavy as possible, otherwise the threads will not be tightened enough and will skip all the time (and will l...
Casting solder into resin-printed molds
Last time I tried to pur solder into a hand-cut cardboard "mold". The result was as inaccurate as one would expect. My attempts to smooth it out with epoxy...
Useful parts: pogo pins
I’ve recently encountered spring-loaded pogo pins for PCB testing.
Level-luffing crane, motorized and 3D printed [WIP]
3D printed and motorized model of a horse-head portal crane in HO scale
Container crane, motorized [Idea]
Motorized container terminal crane in HO scale. This is currently only an idea.
motorized
Introducing a 3D-printed DIY powered 2-axle chassis
A 3D-printed powered chassis for 2-axle locomotives.
Updates for February and March
So, here is what I’ve been doing for the past 2 months.
3D-printed powered 2-axle chassis
A chassis project for a DIY locomotive, e.g. shunter, railbus, tram etc
Motorized wind generator
3D-printable scale model of a wind generator
Motorized oil pumpjack
A model of an oil pumpjack for industrial layouts.
Level-luffing crane, motorized and 3D printed [WIP]
3D printed and motorized model of a horse-head portal crane in HO scale
Motor control board
A small PCB to control motors in small-scale models. I’ve developed it as part of the portal crane.
BLE-based micro scale RC receiver
A 10x14mm PCB with nRF52 MCU
Research on hardware selection
For the project, BLE hardware needs to be chosen. I’ve considered 2 options: using a ready-made BLE board and custom-made PCB.
pcb
Motor board for portal crane
For some time I’ve wanted to develop a PCB again. Last time I did that was around 2021, when I made LocoNet-equipped decoder and command station for...
Motor board delivery updates
So, the JLCPCB and LCSC orders were made on April 28.
Crane updates
The crane mechanics is close to completion
Useful parts: pogo pins
I’ve recently encountered spring-loaded pogo pins for PCB testing.
Updates on the projects
There were no updates for a long time due to my vacation, but finally here are some.
Updates on RC truck and BLE-RC electronics
A latest video of state of the project (mid-august):
MK0 of BLE-RC transmitter
Continuing on BLE-RC transmitter.
ble
Updates on the projects
There were no updates for a long time due to my vacation, but finally here are some.
Updates on RC truck and BLE-RC electronics
A latest video of state of the project (mid-august):
Updates on RC kit and BLE-RC firmware
BLE-RC firmware
Finally RC kit project has a video!
I finally made a video about RC kit project:
Moving on to RC transmitter
I’ve created a page for the development of the transmitter. Expect updates there. So far I’ve created a breadboard prototype that is able to c...
MK0 of BLE-RC transmitter
Continuing on BLE-RC transmitter.
RC transmitter using BLE [WIP]
An ESP32 RC remote with display that works over BLE
arduino
On advanced audio effects on a layout
Making realistic continuous and polyphonic sound effects
Level-luffing crane, motorized and 3D printed [WIP]
3D printed and motorized model of a horse-head portal crane in HO scale
Motor control board
A small PCB to control motors in small-scale models. I’ve developed it as part of the portal crane.
BLE-based micro scale RC receiver
A 10x14mm PCB with nRF52 MCU
Research on hardware selection
For the project, BLE hardware needs to be chosen. I’ve considered 2 options: using a ready-made BLE board and custom-made PCB.
Container crane, motorized [Idea]
Motorized container terminal crane in HO scale. This is currently only an idea.
Arduino Nano Expansion Board
With options for motor, OLED display and Nunchuck
RC transmitter using BLE [WIP]
An ESP32 RC remote with display that works over BLE
wagon
Project: Flatcar series 13-401
A new project: Flatcar series 13-401. A model of a flat wagon, which is widespread in USSR, Russia and other 1520mm guage countries.
Photos of printed flatcars
Flatcar series 13-401 project now has photos of finished objects!
One weekend build: a gondola wagon
This weekend I’ve done a short project, which was printing a gondola (model 12-1592) car in HO scale.
A gondola wagon, now with cargo
Making cargo for a gondola ended up being longer than printing the gondola itself. I had some sticks and branches lying around, that I cut to length and g...
Working on Soyuz rocket transporter
I have finally started to work on assembling 11T750 wagon for Soyuz rocket train.
Flatcar series 13-401
A model of a flatcar widespread in USSR, Russia and other 1520mm guage countries
Freight bogie series 18-100
HO scale train bogie for FDM and resin printers.
Soyuz transporter train
A model of a Soyuz rocket transporter train in HO scale.
scenery
On advanced audio effects on a layout
Making realistic continuous and polyphonic sound effects
Introducing project: a tank container collection
This week I’ve reworked my older tank container into a collection of different options, so they add some variety to the layout. For now, there are 2 ...
Another tank container
This week I’ve added one more tank into my tank container collection, codename frame2. It turned out to be much more complicated that previous design...
Another tank container assembled
I’ve assembled, primed, sanded and painted second container variant (frame2). Here are the pictures (along with frame1 variant). New variant is in red.
Tank containers collection
Collection of HO scale models of tank containers
Containers collection
Collection of HO scale models of ISO containers
Motorized oil pumpjack
A model of an oil pumpjack for industrial layouts.
portal crane
Updates for February and March
So, here is what I’ve been doing for the past 2 months.
Slip ring ideas, two of them
The functional crane model I’m working on requires a slip ring to rotate superstructure. Currently this is implemented as a 3D-printed casing for bron...
Winch based on N20 gearmotor
Any functional crane model obviously requires a winch (or two).
Experiments with cast solder
In portal crane project the hook has to be as heavy as possible, otherwise the threads will not be tightened enough and will skip all the time (and will l...
Casting solder into resin-printed molds
Last time I tried to pur solder into a hand-cut cardboard "mold". The result was as inaccurate as one would expect. My attempts to smooth it out with epoxy...
Level-luffing crane, motorized and 3D printed [WIP]
3D printed and motorized model of a horse-head portal crane in HO scale
animated
Introducing a 3D-printed DIY powered 2-axle chassis
A 3D-printed powered chassis for 2-axle locomotives.
3D-printed powered 2-axle chassis
A chassis project for a DIY locomotive, e.g. shunter, railbus, tram etc
Motorized wind generator
3D-printable scale model of a wind generator
Motorized oil pumpjack
A model of an oil pumpjack for industrial layouts.
Motor control board
A small PCB to control motors in small-scale models. I’ve developed it as part of the portal crane.
equipment
Introducing project: a tank container collection
This week I’ve reworked my older tank container into a collection of different options, so they add some variety to the layout. For now, there are 2 ...
Another tank container
This week I’ve added one more tank into my tank container collection, codename frame2. It turned out to be much more complicated that previous design...
Another tank container assembled
I’ve assembled, primed, sanded and painted second container variant (frame2). Here are the pictures (along with frame1 variant). New variant is in red.
Tank containers collection
Collection of HO scale models of tank containers
Containers collection
Collection of HO scale models of ISO containers
cargo
Introducing project: a tank container collection
This week I’ve reworked my older tank container into a collection of different options, so they add some variety to the layout. For now, there are 2 ...
Another tank container
This week I’ve added one more tank into my tank container collection, codename frame2. It turned out to be much more complicated that previous design...
Another tank container assembled
I’ve assembled, primed, sanded and painted second container variant (frame2). Here are the pictures (along with frame1 variant). New variant is in red.
Tank containers collection
Collection of HO scale models of tank containers
Containers collection
Collection of HO scale models of ISO containers
mcu
Motor control board
A small PCB to control motors in small-scale models. I’ve developed it as part of the portal crane.
BLE-based micro scale RC receiver
A 10x14mm PCB with nRF52 MCU
Research on hardware selection
For the project, BLE hardware needs to be chosen. I’ve considered 2 options: using a ready-made BLE board and custom-made PCB.
RC transmitter using BLE [WIP]
An ESP32 RC remote with display that works over BLE
winch
Winch based on N20 gearmotor
Any functional crane model obviously requires a winch (or two).
Experiments with cast solder
In portal crane project the hook has to be as heavy as possible, otherwise the threads will not be tightened enough and will skip all the time (and will l...
Casting solder into resin-printed molds
Last time I tried to pur solder into a hand-cut cardboard "mold". The result was as inaccurate as one would expect. My attempts to smooth it out with epoxy...
stm32
Motor board for portal crane
For some time I’ve wanted to develop a PCB again. Last time I did that was around 2021, when I made LocoNet-equipped decoder and command station for...
Motor board delivery updates
So, the JLCPCB and LCSC orders were made on April 28.
Motor control board
A small PCB to control motors in small-scale models. I’ve developed it as part of the portal crane.
rocket
Working on Soyuz rocket transporter
I have finally started to work on assembling 11T750 wagon for Soyuz rocket train.
Soyuz transporter train
A model of a Soyuz rocket transporter train in HO scale.
slip ring
Updates for February and March
So, here is what I’ve been doing for the past 2 months.
Slip ring ideas, two of them
The functional crane model I’m working on requires a slip ring to rotate superstructure. Currently this is implemented as a 3D-printed casing for bron...
actuators
Updates for February and March
So, here is what I’ve been doing for the past 2 months.
Motor control board
A small PCB to control motors in small-scale models. I’ve developed it as part of the portal crane.
metal
Experiments with cast solder
In portal crane project the hook has to be as heavy as possible, otherwise the threads will not be tightened enough and will skip all the time (and will l...
Casting solder into resin-printed molds
Last time I tried to pur solder into a hand-cut cardboard "mold". The result was as inaccurate as one would expect. My attempts to smooth it out with epoxy...
useful parts
Useful parts: pogo pins
I’ve recently encountered spring-loaded pogo pins for PCB testing.
Useful parts: TWS headphones
Another issue of "Useful parts", this time about TWS headphones.
buildings
Motorized wind generator
3D-printable scale model of a wind generator
Motorized oil pumpjack
A model of an oil pumpjack for industrial layouts.
audio
On advanced audio effects on a layout
Making realistic continuous and polyphonic sound effects
esp8266
On advanced audio effects on a layout
Making realistic continuous and polyphonic sound effects
3d printing
Updates
The 3D printable files for RC truck are published!. The link is on project page, and for convenience also here:
special purpose
Soyuz transporter train
A model of a Soyuz rocket transporter train in HO scale.
esp32
RC transmitter using BLE [WIP]
An ESP32 RC remote with display that works over BLE